Dascom 7206 Quick Start Guide User Manual
Browse online or download User Manual for Printers Dascom 7206 Quick Start Guide. Dascom 7206 Quick Start Guide User Manual
- Page / 2
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
2
1
Connection to Power
a. Check that the power switch to the printer is turned OFF.
b. Connect the power cord to the printers power socket.
c. Insert the mains plug in to the AC outlet.
Congratulations…
On your choice of a Tally Dascom label printer.
Please take a moment to read this Quick Start Guide which will familiarise yourself with the
printer and its operation. The printer is a sophisticated but easy-to-use label printer featuring
simple media loading and quick connection.
We will guide you through unpacking the printer from its carton, connection to your
computer system and installation of the media including a quick self-test of the printer to
ensure it is working.
Safety
If you have not done so already, please carefully read the safety instructions included at the
beginning of this Quick Start Guide and in more detail on the user manual included on the
CD-ROM. Failure to observe the safety precautions could cause serious injury or damage to
both you and your property.
Unpacking Your Printer
a. Carefully unpack your new printer and ensure all the items shown on the adjacent picture
are present in your printer’s carton. In some cases, your supplier or Tally Dascom may have
added extra items required for your particular installation such as additional CD-ROM,
cable or manuals. Instructions for each of these items will be included within the
individual packages.
b. If you have any questions, or if you nd any of the items are missing, please initially refer back
to your supplier. Otherwise, contact details for Tally Dascom’s regional oces are shown on
the back page of this Quick Start Guide.
c. The printer is shipped with adhesive tape in place to hold the top cover closed. Simply
remove the two pieces of tape on either side of the top cover. Then simply open the cover by
lifting up and tipping it backwards.
d. There is another strip of adhesive tape that must be removed which holds the mechanism
closed for shipping. Remove the tape and attached paper by carefully peeling from the
plastic case..
Connection to a Computer
This product has two interfaces that can be used to receive printing data: a serial port
(RS232C) and a USB port (USB1.1). An optional internal Ethernet, an IEEE1284 Parallel or
Wireless LAN interface can be added by your dealer. If an optional network interface is
used, contact your Tally Dascom Systems dealer.
With the exception of a wireless LAN connection, an interface cable is necessary to connect
the printer to a computer. To connect the cable, proceed as follows:
a. Turn OFF the power switches of both the printer and the computer.
b. Connect one end of the interface cable to the interface connector on the back of the
printer and secure it with locks or locking screws, where available.
c. Connect the other end of the interface cable to the interface connector on the computer
and secure it with locks or locking screws, where available.
Caution
Use an AC outlet that accepts a three-pronged plug.
Otherwise, static electricity may be generated and there
will be danger of electric shock.
Read This First !
For the safe operation of your printer, please read the following important operation and safety instructions carefully. Failure to observe
these precautions can result in personal injury or property damage or, in extreme situation, serious injury or death.
1. Read all of these instructions and save them for later reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners, thinner, trichloroethylene, benzine,
ketone or similar chemicals. Instead use a damp cloth for cleaning, when the printer is disconnected from the mains supply.
4. Do not use this product near water or where a chemical reaction can occur such as in a laboratory or where there is a lot of oil, dust,
salt or iron particles.
5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product and
people around it.
6. Slots and openings on the cabinet and the back or bottom are provided for ventilation.
7. To ensure reliable operation of the product and to protect it from overheating, do not block or cover these openings. The openings
should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed
near or over a radiator or heat source. This product should not be placed in a built-in installation unless proper ventilation is
provided.
8. This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of
power available, consult your dealer or local power company.
9. This product is equipped with a three-pronged plug, a plug having a third grounding pin. This plug will only t into a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
10. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be walked on. Do not pull on the
power cord or data cables or keep them under tension.
11. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the
extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall
outlet does not exceed 7.5 amperes for 220/240V outlet and 15 amperes for a 120V outlet.
12. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts
that could result in a risk of re or electric shock. Never spill liquid of any kind on the product.
13. Except as explained elsewhere in this manual, don't attempt to service or disassemble this product yourself. Opening and removing
those covers that are marked "Do Not Remove" may expose you to dangerous voltage points or other risks. Refer all servicing on
those compartments to service personnel.
14. The mains plug on this equipment must be used to disconnect mains power. Please ensure that the socket outlet is installed near the
equipment and shall be easily accessible.
15. Unplug this product from the wall outlet and refer servicing to qualied service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid, aerosol chemicals or other chemicals have been spilled into the product.
c. If the product has been exposed to rain or water or excessive humidity.
d. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive
work by a qualied technician to restore the product to normal operation.
e. If the product has been dropped or knocked or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for service.
16. Discard or safely store the plastic packing bag. This bag should be kept away from children. If the bag is pulled over child's head, it
may cause suocation.
17. Make sure if you open the top cover, it is opened all the way. If only partially open, the cover could slam shut, possibly causing injury.
18. When the cover is open, be careful of the corners of cover. They could cause injury.
19. Do not open the printer during printing.
20. Operate the control panel properly. A careless, rough handling may cause problems or malfunction. Do not use such sharp-edged
tool as a ballpoint for operation.
21. If a problem occurs during printing, stop the printer immediately and unplug the power cord from the outlet.
22. The contents of this manual may be changed without prior notice.
23. Reproduction, transfer, or transmission of the contents of this manual without prior consent is strictly prohibited.
24. We are not liable for any damage resulting from the use of the information contained herein, regardless of errors, omissions, or
misprints.
25. We are not liable for any problems resulting from the use of optional products and consumable supplies other than the designated
products contained herein.
26. We are not liable for any damage caused by user's erroneous use of the printer and inadequate environment.
27. Data residing in the printer is temporary. Therefore, all data will be lost if power is lost. We are not liable for any damage or loss of
prots caused by data loss due to failures, repairs, inspections, etc.
28. Please contact us if there are any mistakes or ambiguities within this manual.
29. If there are missing or incorrectly collated pages in this manual, contact us to obtain a new manual.
30. Trademarks or registered trademarks of other companies and products are included in this manual. Tally Dascom acknowledges all
trademarks.
Compliance Statement for European Users
CE marking shows conformity to the following criteria and provisions:
Low Voltage Directive (2006/95/EC)/EN60950-1
EMC Directive (2004/108/EC)/EN55022, EN55024, EN61000-3-2 & EN61000-3-3
This product has been tested under EN ISO 7779 and has a acoustic level output no higher than 55db(A)
This device is not intended for use at a video workstation in compliance with Bildscharb V.
FCC Compliance Statement for American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
EMI Compliance Statement for Canadian Users
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the
manufacturer's instructions, may cause interference to radio and television reception. This digital apparatus does not exceed the Class A
limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications. This equipment is designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Use shielded cables to connect this device to computers. Any changes or modications not expressly approved by the
grantee of this device could void the user's authority to operate the equipment.
Etat de Conformite EMI à l'usage des Utilisateurs Canadiens
Cet équipment produit et utilise l'énergie à radiofréquences et s'iln'est pas installé et utilisé correctment, c'est à dire en accord strict avec
les instructions du fabricant, il risque de provoquer des intérferences avec la réception de la radio et de la télévision.
Le présent appareil numérique n'émet pas de bruite radio électriques dépassant les limites applicables aux appareils numériques de la
classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
Cet équipment est conçu pour fournir une protection satisfaisante contre de telles interférences dans une installation résidentielle.
Cependant, il n'y a pas de garantie contre les interférences avec les réceptions radio ou télévision, provoquées par la mise en et hors
circuit de l'équipment; aussi, il est demandé a l'utilisateur d'essayer de corriger l'interférence par l'une ou plus des mesures suivantes:
Réorienter l'antenne de réception.
Installer l'ordinateur autre part, par égard pour le récepteur.
Brancher l'ordinateur dans une prise de courant diérente de fa?on à ce que l'ordinateur et le récepteur soient branchés sur des
circuits diérents.
!
Safety Instructions - which must be strictly observed
Quick Start Guide
This Quick-Start Guide covers basic operation.
For detailed operating instructions, please see the User's Manual on the
supplied CD-ROM.
For further information and more detailed instructions on the use of your new
printer, please refer to the complete user manual included on the CD-ROM
accompanying your printer. Alternatively, you can download the user manual and
additional data from Tally Dascom's websites shown below.
For Further Information . . .
Basic Carton Contents
The following items are only present in the 7206 and 7206-300 cartons:
7106 7206 Thermal Printers
CD-ROM
Quick-start Guide
Media holder barMedia holder guideHead cleaner
Paper CoreSample RibbonRibbon Holder
Test label media Power cord
Printer
The following items are present in all cartons:
T
h
is
Q
u
i
c
k
-S
t
a
r
t
G
u
id
e
c
o
v
e
r
s
b
a
s
i
c
o
p
e
r
a
t
io
n
.
F
o
r
d
e
t
a
i
le
d
o
p
er
a
t
i
n
g
in
s
tr
u
c
t
i
o
n
s,
p
le
a
s
e
s
ee
t
h
e
U
s
e
r's
M
a
n
u
a
l
o
n
th
e
s
u
pp
li
e
d
C
D
-
R
O
M
.
AC Outlet
Power Cord Inlet
Power Switch
Serial Interface Cable
USB Interface Cable
72067106
All rights reserved
© August 2010 DASCOM Europe GmbH
Printed in China
379854a-EN
JM74992-00F
DASCOM REPRESENTATIVES
GERMANY
DASCOM Europe GmbH
Heuweg 3
D-89079 Ulm
Deutschland
Tel.: +49 (0) 731 2075 0
Fax: +49 (0) 731 2075 100
www.dascom.com
UNITED KINGDOM
DASCOM GB Ltd
ViewPoint, Basing View,
Basingstoke, Hampshire
RG21 4RG, England
Phone: +44 (0) 1256 481481
Fax: +44 (0) 1256 481400
www.dascom.com
SINGAPORE
DASCOM AP Pte Ltd
63 Hillview Avenue
#08-22, Lam Soon Industrial Building
Singapore 669569
Phone: +65 6760 8833
Fax: +65 6760 1066
www.dascom.com
AMERICAS
DASCOM Americas Corporation
421 W. Main Street
Waynesboro, VA 22980
USA
Phone: +1 (877) 434 13 77
www.dascom.com
FRANCE
DASCOM Europe GmbH
117 Avenue Victor Hugo
92100 Boulogne-Billancourt
France
Phone: +33 (1)73 02 51 98
www.dascom.com
RUSSIA and CIS
DASCOM Europe GmbH
Representation Moscow
Leninsky Prospekt 95a, Office 322
119313 Moscow, Russian Federation
Phone: +7 (495) 984 70 65
Fax: +7 (495) 984 56 42
www.dascom.com
CEE
DASCOM Europe GmbH
Europaring F15 301
2345 Brunn a. G.
Austria
Phone: +43 (1) 236 01 70 10
www.dascom.com
1
2
Summary of Contents
Page 1 - Read This First !
21 Connection to Powera. Check that the power switch to the printer is turned OFF.b. Connect the power cord to the printers power socket.c. Insert
Page 2 - Drivers
3Media Installation6Unusually Shaped Media AdjustmentPrinter Driver InstallationIf the drivers are not included with the printer, you can download the
More documents for Printers Dascom 7206 Quick Start Guide
Related products and manuals for Printers Dascom 7206 Quick Start Guide
(2 pages)
(2 pages)
(2 pages)
Printers Dascom 7206 User Guide User Manual
(66 pages)
(66 pages)
Printers Dascom 7010 User Guide User Manual
(81 pages)
(81 pages)
© 2020, manymanuals.com. All rights reserved. | 1.813 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals